Green Leaf WW-1 Wonder Winder Hand Crank Extension Cord Winder

Green Leaf WW-1 Wonder Winder Hand Crank Extension Cord Winder Review

Green Leaf WW-1 Wonder Winder Hand Crank Extension Cord Winder Feature

• Wall-mounted device winds extension cords with crank handle
• Designed for indoor or outdoor use
• Stores up to 150 feet of 16/3 cord, 100 feet of 14/3 cord or 75-Feet of 12/3 cord
• Comes with mounting plates for easy installation
• Cord not included

The Wonder Winder ends extension cord spaghetti for good. With the Wonder Winder, you'll never have to waste time untangling and coiling extension cords again. It comes with two twist-lock mounting plates that attach to a wall of your shop, garage, or basement, or outside of your house--anywhere you have an outlet. You can then just move the Wonder Winder from one location to another as you need it.

The unit's basket holds up to 75-feet of 12/3 cord, 100-feet of 14/3 cord, or up to 150-feet of 16/3 cord. Simply plug your tool into the cord end, and as you walk to your work area the cord follows. When you're done, press the rewind lever, turn the handle, and your extension cord is stored neatly for future use. And it's quick, too--the Wonder Winder pulls in 100 feet of cord in about 30 seconds. The reversible handle can be used right or left handed. It's backed by a 3-year warranty. Assembly required (see a schematic of all the parts). Cord not included.

The Wonder Winder holds 150 feet of cord and winds 100 feet of cord in 30 seconds. It is portable and can be used indoors and outdoors. Cord not included. Reversible handle can be used right or left handed.

Stanley 89-962 3/8-Inch Drive Rotator Ratchet

Stanley 89-962 3/8-Inch Drive Rotator Ratchet Review

Stanley 89-962 3/8-Inch Drive Rotator Ratchet Feature

• Provides Constant Drive Action with the Twist Action Handle
• Twist Action speeds fastening and loosening
• Thumb operated reverse switch and quick release button
• Works in tight spaces - Requires less than 1 degree arc swing in Twist Action mode. 3/8" drive, Pear Read ratchet design
• Limited Lifetime Warranty

Provides constant drive action with the Twist Action handle. Twist Action speeds fastening and loosening. Thumb operated reverse switch and quick release button. Works in tight spaces requires less than 1 arc swing in Twist Action mode. 3 8" drive, Pear

Milwaukee 2625-21CT M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw Kit

Milwaukee 2625-21CT M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw Kit Review

Milwaukee 2625-21CT M18 18-Volt Hackzall Cordless One-Handed Reciprocating Saw Kit Feature

• One-handed design provides superior control and versatility over a standard reciprocating saw
• Compact size allows for cutting in tight spaces, and light weight makes overhead work easier
• QUIK-LOK Blade Clamp offers fast, easy tool free blade changes for SAWZALL Blades and HACKZALL Blades
• Built-In LED light illuminates the work surface while cutting
• Compatible with M18 XC High Capacity LITHIUM-ION Batteries and M18 Compact LITHIUM-ION Batteries

Includes 18V Cordless Hackzall Reciprocating Saw with Compact Li-Ion Battery - 2625-21CT, M18™ Compact Lithium-Ion Battery, 1-Hour Charger, SAWZALL® Blade, Contractor Bag

Corona Clipper AC 8300 Sharpening Tool

Corona Clipper AC 8300 Sharpening Tool Review

Corona Clipper AC 8300 Sharpening Tool Feature

• 5-Inch super carbide file

Corona AC8300 Sharpening ToolCorona AC8300 Sharpening Tool Features:; 5â Super carbide file; Ideal for sharpening all blades; Easy fit in pocket; No slip grip for easy use "Corona AC8300 Sharpening Tool Specifications:; Ideal for sharpening all kinds of blades; Small size fits easily in pocket; No slip grip for easy use; 5" super carbide file

General Tools 195-1/2 1/2-Inch Countersink Bit

General Tools 195-1/2 1/2-Inch Countersink Bit Review

General Tools 195-1/2 1/2-Inch Countersink Bit Feature

• 1/2"
• 1/4" round shank

1/2" HS Countersink, Pattern Cutting Flutes That Assure Chatter Free Countersink On Steel, Brass, Aluminum & Wood, Made Of High Speed Steel With 5 Flutes, 82 Degree Point Angle With 1/4" Round Shank.

Large Shoulder Plane

Large Shoulder Plane Review

Large Shoulder Plane Feature

• 8¼" long, with a 1¼" x .140" thick blade
• Body is cast from Ductile Iron, the lever cap is Bronze
• Captive-nut blade adjustment
• Adjustable mouth and locking screws are large and convenient
• Mouth adjustment screw is captured in the toe piece and threaded into the body

This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model. The body is precisely ground flat and square - an essential feature for a shoulder plane. The blade is .005" wider than the body, bedded at 18 degrees with a 25 degree bevel. This is a large tool, but the size gives excellent control even on relatively small work.

K Tool International 73400 3/16-Inch Letters and Numbers Metal Stamp with Case

K Tool International 73400 3/16-Inch Letters and Numbers Metal Stamp with Case Review

K Tool International 73400 3/16-Inch Letters and Numbers Metal Stamp with Case Feature

• 3/16" Set with Numbers and Letters
• Weight 3 lbs.

• Combination set includes 3/16 in. set of numbers and 3/16 in. set of letters

PanaVise 324 Electronic Work Center

PanaVise 324 Electronic Work Center Review

PanaVise 324 Electronic Work Center Feature

• Includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station
• Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360
• Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place
• Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg)
• Limited Lifetime Warranty!

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 324 ELECTRONIC WORK CENTER, Makes your work areas more efficient and manageable! This complete package creates an economical work station with everything right at your fingertips! This practical, pre-assembled combination includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station. Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place. Release the knob pressure and Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360 and can be easily removed from the base. Base is compatible with all 300 series Heads. Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg). Limited Lifetime Warranty!

DEWALT DC515K 1/2 Gallon 18-Volt NiCd Cordless Wet/Dry Vac

DEWALT DC515K 1/2 Gallon 18-Volt NiCd Cordless Wet/Dry Vac Review

DEWALT DC515K 1/2 Gallon 18-Volt NiCd Cordless Wet/Dry Vac Feature

• Dual clean-up modes allow for debris removal with either the front utility nozzle or extendable rubber hose
• 1/2 gallon tank with heavy-duty latch is easy to empty and clean
• Gore HEPA wet/dry filter traps 99.97% of dust at 0.3 microns
• Washable filter; Tap or water rinse to clean
• Heavy-duty rubber hose provides durability and flexibility; Large on/off switch that is easy to access with one hand

The DEWALT DC515K 18-Volt Cordless 1/2-Gallon Wet/Dry Portable Vac makes your shop or jobsite cleanups quick and easy. Powered by DEWALT exclusive extended run time batteries, this wet/dry vac features a durable tank that's suitable for both wet and dry messes. For added convenience the wet/dry vac features a flexible hose, a front utility nozzle, and a washable GORE filter.

18-Volt Cordless 1/2-Gallon Wet/Dry Portable Vac At a Glance: Lightweight, portable, and cordless design Wet and dry performance with 1/2-gallon tank Front utility nozzle and a durable, extendable rubber hose Washable, 0.3-micron GORE HEPA wet/dry filter captures 99.97 percent of dust Three-year limited warranty and 90-day money-back guarantee

Use the wet/dry vac for quick and easy jobsite clean up. View larger.

This cordless 18-volt wet/dry vac features a 1/2-gallon tank. View larger.

Dual Clean-Up Modes and Flexible 2-1/2-Foot Hose
Built to make clean up quick and easy, the DEWALT 18-Volt Wet/Dry Vac goes wherever your work takes you with its cordless design and 1/2-gallon tank. Contributing to its portability, the entire wet/dry vacuum weighs just 6 pounds. A heavy-duty latch secures the tank when the vacuum is in use, and is easy to release when it's time to empty and clean out the tank.

The DC515K also features a large on/off switch that is easy to access with one hand, and dual clean-up modes that allow you to choose between removing debris with the vacuum's front utility nozzle or an extendable rubber hose. The hose option utilizes a heavy-duty rubber hose that is both durable and flexible. And at 2-1/2 feet long and 1-1/4 inches in diameter, it provides the size and reach you need to get under work tables or in other tight spaces.

Washable 0.3-Micron Filter
At the heart of the DC515K's performance is a GORE HEPA wet/dry filter that's rated at 0.3 microns and traps 99.97 percent of dust particles. This capture rate helps to keep work sites looking their best and helps to keep the air you breathe cleaner and safer.

This washable filter is incredibly easy to clean. You can either tap the filter clean or rinse it clean with water--no big mess or complicated cleanup.

Trademarked XRP Extended-Life Battery System
A tool's only useful if it runs long enough to get the job done and the DEWALT XRP extended run time batteries keep the DC515K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.

The DC515K 18-Volt Cordless 1/2-Gallon Wet/Dry Portable Vac comes with a DEWALT warranty package that includes a three-year limited warranty and a 90-day money-back guarantee.

What's in the Box
DC515K 18-Volt Cordless 1/2-Gallon Wet/Dry Vac, one-hour Ni-Cad charger, and 18-volt XRP Ni-Cad battery.

Use the heavy-duty rubber extension hose to access hard-to-reach areas.

The DeWalt DC515K Heavy Duty 1/2-gallon 18-volt Ni-Cad Cordless Wet/Dry Vacuum features dual clean-up modes for debris clean-up with either the front utility nozzle or the extendable heavy-duty rubber hose. The vacuum's 1/2-gallon tank with heavy-duty latch is easy to empty and clean, and an included Gore HEPA wet/dry filter traps 99.97-percent of dust at 0.3 microns. The filter is washable with tap water. Also included is large on/off switch that is easy to access with one hand. Powered by an 18-volt DeWalt battery pack and backed by a 3-year manufacturer's warranty, this vacuum comes with a one-hour charger and an 18-volt XRP battery.

Roberts Carpet Tools 3-1/2-Inch Stair Tool 10-521

Roberts Carpet Tools 3-1/2-Inch Stair Tool 10-521 Review

Roberts Carpet Tools 3-1/2-Inch Stair Tool 10-521 Feature

• Use to set carpet into tack strip, drive carpet into gullies and crease carpet along wall line
• Cushioned, slip resistant handle
• Checkered head prevents hammer form slipping when securing carpet
• Heavy duty blades easily set carpet into stairway crevices
• Made from forged, chrome-plated steel for durability

Install stairs more efficiently with heavy duty 3 1 2" extra wide blade that drives carpet into the stairway crotch. Forged chrome plated steel for sturdy durability. Many other uses.

McGuire-Nicholas 90427 Contractor'S Apron

McGuire-Nicholas 90427 Contractor'S Apron Review

McGuire-Nicholas 90427 Contractor'S Apron Feature

• Large pouches and pockets to organize and keeps tools in reach
• Features riveted, steel hammer loop
• Features a single prong roller buckle belt
• fits waists sizes 30" - 44"

10 Pocket, Full Grain Oil Tan Leather Apron, Designed To Hold A Wide Variety Of Tools & Fasteners, Includes Center Tape Holder, Single Prong Roller Buckle Belt, Fits Waist Sizes 30" To 44".

TEKTON 6519 Three-Size Tubing Bender

TEKTON 6519 Three-Size Tubing Bender Review

TEKTON 6519 Three-Size Tubing Bender Feature

• Aluminum Alloy Construction with Durable Baked Enamel Finish
• Calibrated to Bend Angles up to 180-Degree
• Smoothly Bends Copper, Brass, Aluminum, and Thin-Walled Steel Tubing without Crimping
• Three-Channel Design Fits 1/4-Inch, 5/16-Inch, and 3/8-Inch O.D. Tubing
• Ideal for Water, Gas, Refrigeration, and Brake Line Applications

MIT THREE-SIZE TUBING BENDER features: Aluminum Alloy Construction, Durable, Baked Enamel Finish, Bender Has Calibrated Angle Markings for Bending Tubing up to 180 degree, Accurately Bends 1/4", 5/16", and 3/8" O.D. Copper, Alloy Steel and Aluminum Tubing, 7-1/4" Knurled Grip Handles for Added Leverage

Cooper Tools 428N Wiss

Cooper Tools 428N Wiss Review

Cooper Tools 428N Wiss Feature

• Cutting Length - 3 3/4 in
• Cut Type - Shear Cut
• Handle Color - Black
• Material - Carbon Steel
• Type - Scissors/Shear

For industrial use. Hot drop-forged nickel-plated blades.

Stanley 10-399 6-Inch Handle Swivel-Lock Fixed Blade Knife

Stanley 10-399 6-Inch Handle Swivel-Lock Fixed Blade Knife Review

Stanley 10-399 6-Inch Handle Swivel-Lock Fixed Blade Knife Feature

• Starts sharper and stays sharper than standard heavy-duty blades
• Patented interlocking nose for safety
• Comfortable, contoured handle swivels open for quick, easy blade change
• Includes 3 blades
• Stanley's limited lifetime warranty

The Stanley 6-Inch Handle Swivel-Lock Fixed Blade Knife starts sharper and stays sharper than standard heavy-duty blades. This knife features a patented interlocking nose for safety. The comfortable, contoured handle swivels open for quick, easy blade change. It includes three blades. Compatible with all Stanley replacement utility blades, this knife comes with Stanley's limited lifetime warranty.

Everyone knows the importance of the right tool for the job. Stanley's "Application Specific Blades" are designed with unique features for cutting drywall, roofing shingles and paper. Each blade is constructed of carbon alloy steel. With Stanley's patented S3 Technology, paper blades start sharper and stay sharper, roofing blades are stronger, and drywall and paper blades deliver more cuts per blade. The entire line provides better performance than standard heavy duty blades. View the comparison chart to choose the Stanley blade that is right for you. The Stanley 6" aluminum handle swivel-lock fixed blade knife 10-399 with Stanley's patented S3 technology starts sharper and stays sharper than standard heavy-duty work blades. This knife features a patented interlocking nose for safety. The comfortable, contoured handle swivels open for quick, easy blade change. It includes three model # 11 921 heavy duty blades. Compatible with all Stanley replacement utility blades, this knife comes with Stanley's limited lifetime warranty.

Mark Grace SCREAMNJIMMY Hand Tools - NOT A HAMMER wrench image 1 - Light Switch Covers - double toggle switch

Mark Grace SCREAMNJIMMY Hand Tools - NOT A HAMMER wrench image 1 - Light Switch Covers - double toggle switch Review

NOT A HAMMER wrench image 1 Light Switch Cover is new and handcrafted utilizing unique process resulting in a stunning high gloss ceramic-like finish. SET OF MATCHING SCREWS IS INCLUDED giving it a perfect finishing touch. Made of durable metal material.